Back to previous page

Macro Photo of lower right insert - 6000 shots brass

Macro Photo of lower right insert
  6000 shots brass

 T-41H + TL06 - held to + or - 5 degrees
T-41H + TherMaLL ifeÒ - held
  to + or - 5 degrees		 Uniformity of processing assured by fluidized bed method
Uniformity of processing 
assured by TherMaLLifeÒ method

Initially processed with T-41 followed by Thermallife
Initially processed with
T-41 followed by Thermallife

Enlargements shown at left and right
Enlargements shown at left and right

Sharp edges are retained throughout diffusion process
Sharp edges are retained throughout diffusion process
T40H Large 28" x 34" deck
Bed size 28" dia x 48" depth

These cores processed 
with T-41 and Thermallife
No size dimensional changes or tolerance concerns
Optimized coverage on all sides and surfaces
There are no "line of sight" limitations with Thermallife
Complete coverage inside recessed
areas and ribs		 Thermallife TL06
TherMaLLifeÒ

440 Stainless Steel tool
Complete Coverage by TherMaLLifeÒ

Back to previous page

 

Page was last modified 02/20/2010
Home  |  About Us  |  Services  |  Gallery |  Glossary  |  Contact Us

Copyright © 1996-2009 Badger Metal Tech, Inc. All Rights Reserved.
Reproduction in whole or in part in any form or medium without express written permission of Badger Metal Tech is Prohibited.
 MetaLL ifeÒ and TherMaLLifeÒ are registered with the US patent and trademark office. Intellectual property and graphics contained herein are the sole property of Badger Metal Tech, Inc.