N60 W15088 Bobolink Ave. --  Menomonee Falls, WI 53051 -- (262) 252-3804 / 800-366-1973 - Email Badger Metal Tech

Javascript DHTML Drop Down Menu Powered by dhtml-menu-builder.com

 Verifies Surface Hardness / Integrity
Dies that are inherited from another drawing / forming / stamping company are sometimes very old, and have no history to show prior maintenance that was done to the tool.  MetaLL ifeÒ verifies the surface hardness of these dies and then gives visual evidence after processing that verifies where and if the dies has been nitrided, welded, coated, or quenched improperly during heat treat. In addition each insert over 50lbs. is surface hardness checked prior to processing, using an EquoTip velocity hardness instrument.


Some web pages were last modified 07/14/2010
Home  |  About Us  |  Services  |  Gallery |  Glossary  |  Contact Us

Copyright © 1996-2010 Badger Metal Tech, Inc. All Rights Reserved.
Reproduction in whole or in part in any form or medium without express written permission of Badger Metal Tech is Prohibited.
 MetaLLifeÒ and TherMaLLifeÒ are registered with the US patent and trademark office. Intellectual property and graphics contained herein are the sole property of Badger Metal Tech, Inc.