Metallife is not a coating or plating that increases die lubricity of drawing forming blanking tooling

N60 W15088 Bobolink Ave. -- Menomonee Falls, WI 53051 -- (262) 252-3804 / 800-366-1973 - Email Badger Metal Tech

Increases Die Lubricity

The topography of the MetaLL ifeÒ creates micro pockets for trapping and holding lubricant on the draw form or blanking die and punch surface of the tool. The process also adds a lubricity factor to the dies surface to make it more slippery. This along with the increased surface area caused by the non-linear surface provides a more effective foundation for the applied lubricant retention and piece part release.

Copyright © 1996-2010 Badger Metal Tech, Inc. All Rights Reserved.
Reproduction in whole or in part in any form or medium without express written permission of Badger Metal Tech is Prohibited.
MetaLLifeÒ and TherMaLLifeÒ are registered with the US patent and trademark office. Intellectual property and graphics contained herein are the sole property of Badger Metal Tech, Inc.