N60 W15088 Bobolink Ave. --  Menomonee Falls, WI 53051 -- (262) 252-3804 / 800-366-1973 - Email Badger Metal Tech

Javascript DHTML Drop Down Menu Powered by dhtml-menu-builder.com

Dramatic Field Test Results Comparing treated and untreated surfaces on the same tool.

Return to "Stops Heat Checking" Page

The below photos show the benefit of the re-application of  MetaLL ifeÒ


Casting from die - no reapplication
of MetaLL ifeÒ.
Condition at 72,000 shots
(not cavitation breakout)
(processed only once well into life of tool)


   Casting from die processed with MetaLL ifeÒ
(when new and every 30K).
Condition at 112,000 shots
 (still running parts at 160,000 shots)

Return to "Stops Heat Checking" Page

Page was last modified 02/20/2010
Home  |  About Us  |  Services  |  Gallery |  Glossary  |  Contact Us

Copyright © 1996-2009 Badger Metal Tech, Inc. All Rights Reserved.
Reproduction in whole or in part in any form or medium without express written permission of Badger Metal Tech is Prohibited.
 MetaLL ifeÒ and TherMaLLifeÒ are registered with the US patent and trademark office. Intellectual property and graphics contained herein are the sole property of Badger Metal Tech, Inc.