click on the above logos for more information on each process or use drop down menus below
Our new address: N169 W21010 Meadow Lane (P.O. Box 156)- Jackson, WI 53037
Effective July 7, 2011 Badger is moving to a larger 160,000 sq. ft. facility to more effectively service our growing customer base.

Javascript DHTML Drop Down Menu Powered by dhtml-menu-builder.com

Why we use Lambda?
Combined MetaLLife Curves showing T-41 through T-71 processes

Click here - to view surface topography after MetaLLife

Compressive Stress Values as a function of Depth
(1000psi = 1ksi = 6.9mpa = 6,895,000pa)

Taken June 1997

values above 0 on the "y" axis show tensile stress - allows crackings
values below 0 on the "y" axis show compressive stress - stops cracking

VALUES FROM H-13 COUPON SAMPLES HARDENED TO 44-46Rc

"T-41H offers highest degree of compression and depth
Click here to view separate curves

The T-41H values for max depth are greater
than the values for T-71 which exhibits less
surface topography than T-41H

The graph on this page is archived and cannot be changed

 

Some web pages were last modified 07/06/2011
Home  |  About Us  |  Services  |  Gallery |  Glossary  |  Contact Us

Copyright © 1996-2011 Badger Metal Tech, Inc. All Rights Reserved
N169 W21010 Meadow Lane  Jackson, WI 53037   262-252-3804
Reproduction in whole or in part in any form or medium without express written permission of Badger Metal Tech is Prohibited.
 MetaLLifeÒ and ThermaLLifeÒ and TooLLife™ are registered or in process with the US patent and trademark office.  Intellectual property and graphics contained herein are the sole property of Badger Metal Tech, Inc.